LONG COMMUNICATIONS
DUNKINEELY - CO. DONEGAL - IRELAND
TEL. +353 74 973 7152
LONG COMMUNICATIONS

 

SECOND HAND MOTOROLA MOBILE RADIOS

 


   
 

 Ideal for tractors and silage contractors, call for more details.

 

SECOND HAND ICOM 7400

 

 

 

 

HF/50MHz/144MHz base station transceiver

The IC-7400 covers HF, 50MHz and 144MHz bands with a powerful 100W of output power and carries on the reputation earned by the IC-746. It offers improved performance and a wide range of new features that are destined to set a new benchmark in this important market. The biggest news of all is that this new transceiver has adopted the same IF DSP as the IC-756PRO and its successor, the IC-756PRO2. ICOM has used a 32-bit floating point DSP and 24-bit AD/DA converter at the heart of the IC-7400, which makes this base station fresh and exciting. Furthermore, the digital IF filter shape is selectable from sharp to soft for both SSB and CW modes. Now let's just see what else this new rig has to offer the demanding Amateur.

32-bit floating point DSP and 24-bit AD/DA converter
The IC-7400 adopts the 32-bit floating point DSP and 24-bit AD/DA converter in the IF stage. This combination dramatically improves the precision and the scale of the signal processing and provides a wide dynamic range from HF to 144MHz band.

Digital IF filter
DSP is used for the IF filters on all bands. This means no optional IF crystal filters are required for bandwidth selection. Fifty-one different passband widths are available according to operator needs from 50Hz to 3600Hz. Filter Shapes
No optional crystal filters required or needed! 51 built-in, adjustable filters allow for incredible selectivity. The tuning shapes for CW & SSB are independently selectable. You’ve got to try it to believe it! AGC loop management
Digital IF filter and manual notch are included in the AGC loop controlled by the DSP unit. It rejects blocking by extremely strong adjacent signals out of the filter pass bands. Therefore, you will never suffer from blocking of the AGC gain. In addition, the AGC constants are adjustable for each operating mode (slow, medium, and fast pre-set). HF + 50MHz + 144MHz all band coverage
The IC-7400 covers the 1.8MHz to 144MHz amateur bands in all modes (including RTTY). Also the receiver continuously covers from 30kHz to 60MHz and 108-174MHz.*Specifications guaranteed 1.8-29.99, 50-54MHz and 144-148MHz only. Powerful 100W output for all bands
The IC-7400 generates 100W of RF output power not only for HF and 50MHz, but also for the 144MHz band.

PSN (Phase Shift Network)
All of the modulation and demodulation, including FM and RTTY utilises the DSP unit. Especially in the SSB mode, the PSN generates a very clear and high quality transmit signal. The SSB demodulation reproduces received signals with a high S/N (Signal-to-Noise) Ratio that is 10dB better than that of the IC-746.

Digital twin PBT (Pass Band Tuning) capability The digital twin PBT actually changes the IF passband. The twin PBT narrows and shifts the IF passband to effectively eliminate interfering signals. This is useful during crowded band conditions such as pileups, or contests etc. Notch functions
The manual notch function attenuates beat tones. The automatic notch function can eliminate 2 or more interfering signals simultaneously.

PHONE FOR MORE DETAILS
 

 

 

SECOND HAND ICOM R30

 

 

 

The IC-R30 is Icom's latest wideband handheld receiver. Not only does it receive over a wide (0.1 to 3304.999 MHz) frequency range in AM, FM, WFM, USB, LSB and CW, but it can also decode digital modes including P25, NXDN, dPMR, D-STAR and Japanese domestic DCR.

0.1–3304.999 MHz Wideband Coverage
The IC-R30 covers a wide frequency range from 0.1 to 3304.999 MHz in AM, FM, WFM, USB, LSB and CW as well as digital modes*. A ferrite bar antenna for AM broadcasts is built-in, and the earphone cable can be used as an external antenna for FM broadcasts. *SSB, CW and digital modes: 0.1 MHz–1.3 GHz.

PRICE €475

 

JUST IN        SECOND HAND YAESU FT 891  PRICE €475

 

 

FT-891 HF+50Mhz ALL MODE MOBILE TRANSCEIVER

The FT-891 HF All Mode Mobile Transceiver once again continues Yaesu's legacy for legendary receiver design in a compact package, providing uncompromised performance for both the mobile and stationary Amateur operator. High end 32-Bit floating point DSP enhances the operating experience providing a cleaner, clearer signal and reducing overall operator fatigue creating a more enjoyable environment for any Amateur operator.



Uncompromising Receiver Circuit Design Ensures Excellent Performance
• Triple conversion with a 1st IF frequency of 69.450 MHz (SSB/CW/AM
• 3 kHz roofing filter equipped as standard feature
• TCXO provides ±0.5 ppm High frequency stability (-10°C to +50°C)
Stable 100 Watt Output
The FT-891 provides stable 100 Watts (25W AM) of high power output. High reliability is assured by the transmitters careful circuit design with efficient thermostatically-controlled Dual internal fans and the die cast heat transferring chassis.
32-Bit IF DSP Provides effective and optimized QRM rejection
The 32 bit high speed floating Point DSP (max 3000 MIPS) provides effective cancellation/reduction (DNR) of the random noise that is frequently frustrating while on the HF bands. The highly optimized AUTO NOTCH (DNF) automatically eliminates dominant beat tones, and the CONTOUR, and the APF, are very effective receiver noise reduction tools during HF band operations.
USB Connection
A native USB connection supports PC connectivity with a single cable, allowing for full rig control via a virtual serial port connection (VCP).
Features for Ease of Operation
• Large diameter Main Tuning Dial (1.6” / 41mm) with Torque adjustment
• Pop-up Menu for quick and easy navigation
• Multi-function Knob
• Large Transmit/Receive indicator
• Three programmable Front Panel Function Keys
Support for ATAS (Active Tuning Antenna System)
The FT-891 fully supports the ATAS-25 and ATAS-120A Active Tuning Antenna System (optional) allowing for plug and play field and mobile operation.
Ultra compact design
Measuring 6.1” x 2.0” x 8.6” (155 x 52 x 218 mm), The FT-891 is an innovative Multi-band, Multi-mode Mobile/Portable transceiver with an Ultra Compact and rugged case design.
Optional FC-50 Antenna Tuner Unit
The FC-50 is a microprocessor-controlled antenna tuner that is designed specifically for the FT-891. The FC-50 can be easily coupled with the FT-891 and includes all necessary interconnect cables for operation right out of the box.
Specifications
Specifications

Frequency Range: Tx: 1.8 – 54 MHz (Amateur Bands Only) Rx: 30 KHz – 56 MHz
Channel Step: 2/5/10 Hz (SSB, CW), 10/100 Hz (AM,FM)
Frequency Stability: +/- 0.5 ppm 14 °F to + 122 °F (-10 °C to +50 °C)
Modes of Emission: A1A (CW), A3E (AM), J3E (LSB, USB), F3E (FM)
Impedance: 50 Ohms, unbalanced
Supply Voltage: 13.8VDC +/- 15%, negative ground
Current Consumption: Rx: 2.0 A (Signal Present) Tx: 23 A
Operating Tempature Range: 14 °F to ° +122 °F (-10 °C to +50 °C)
Case Size (WxHxD): 6.1” x 2.0” x 8.6” (155 x 52 x 218 mm) w/o Knobs
Weight (Approx.): 4.18 lb (1.9 kg)
Output Power: 100W SSB/CW/FM (AM: 25W)
Circuit Type: SSB/CW/AM: Triple-conversion Super-heterodyne FM: Double Conversion Super-heterodyne
Intermediate Frequencies: 1st: 69.450 MHz / 2nd: 450 KHz
Maximum AF Output: 2.5 W 4 ohmz with 10% THD
Audio output Impedance: 4 to 16 Ohms (8 Ohms nominal)
Sensitivity: SSB/CW (S/N 10dB) 0.158uV (1.8 - 30 MHz), 0.125uV (50 -54 MHz)
AM (S/N 10 dB) 4 uV (0.5 – 1.8 MHz), 1.6uV (1.8 – 30 MHz), 1.2uV (50 – 54 MHz)
FM (12 dB SINAD) 0.35uV (29, 50 – 54 MHz)

 

 

SECOND HAND UNIDEN UBC 780 XLT SCANNER

SPECIFICATIONS

GENERAL
Type:    HF/VHF/UHF receiver/scanner
Frequency range:    25-512 / 806-956 / 1240-1300 MHz
Tuning steps:    5 / 7.5 / 10 / 12.5 / 25 / 50 / 100 KHz
Frequency stability:    ? ppm
Mode:    AM/FM/NFM/WFM
Channels/memory management:    500 regular in 10 banks @ 100 ch/second. Alpha tags
10 priority
EEPROM non-volatile storage
Power supply:    13.8 VDC
Current drain/power consumption:    Max 700 mA
Antenna impedance/connector:    50 ohm / BNC
Dimensions (W*H*D):    177*72*195 mm (6.97*2.84*7.68")
Weight:    1.33 Kg (2.93 lbs)
Other features:    CTCSS & DCS search. Tracks Motorola, EDACS and LTR systems.
PC-programmable via RS-232C. Attenuator. Dimmer.
  

    
RECEIVER SECTION
Receiver system:     conversion superheterodyne
1st IF: ? MHz
2nd IF: ? KHz
Sensitivity:    
Selectivity:    
Image rejection:    
AF output power/speaker:    2.3 W at 10% distortion / 8 ohm
External speaker connector:    3.5 mm, 8 ohm

 

PRICE €200 PREPROGRAMMED WITH 400 CH

 

 

SECOND HAND UBC 360 CLT SCANNER

 

The Uniden Bearcat UBC 360 CLT,Scanner Base, 300 Memory Channels, 10 Banks, Triple Bandplan, Frequency Range 0.5 - 1.72 MHz ( = AM Radio), 25 - 87.3 MHz, 87.3 - 108 MHz ( = WFM Radio ), 108 - 174 MHz, 406 - 512 MHz, 806 - 960MHz, Alarm and Clock Radio, Selectable Airband 12.5/8.33kHz, Channel Memory Scanning, Memory Availability, Direct Channel Access, Channel Lockout, Frequency Lockout, Alarm Clock with Snooze, AM/FM, Priority Channel, Duplicate Channel Alert, Limit Frequency Searching, Aircraft Band Search, Scan and Search Speed, Clock Display, Delay
LCD Backlight, Key Touch Tone, EEprom Memory Backup, Battery Alert, Auto Power Off,

PRICE €90

 

HF All Band Transceiver

Aimed as an entry-level product, the IC-718 continues all the traditions of high quality engineering that you would expect from Icom. Conveniently sized and easy to operate, the IC-718 utilises all the latest RF and digital technology and is designed to be one of the most practical rigs ever! The IC-718 offers an excellent overall specification coupled with ease of use. The first thing that strikes you about the IC-718 is its similarity to the IC-R75 and more importantly that the speaker is mounted on the front panel of the transceiver. With the speaker facing the operator audio can now be more clearly heard during operation.

The IC-718 features a clean 100-Watts transmitter for SSB and CW and a built in electronic keyer for CW and 40 watts output on AM. As you would expect, an all mode, general coverage receiver is built in and covers 30kHz -29.999 MHz. A newly designed PLL circuit has been adopted to improve Signal / Noise ratio characteristics. This combined with a 4-element system mixer ensures truly superior performance.

The IC-718 is equipped with a minimum number of switches and controls for ease of use. For example, the 10-key pad on the front panel allows you to directly enter an operating frequency, or access a memory channel. All popular operating modes are offered; USB, LSB, CW, RTTY (FSK) and AM, in addition there is a level adjustable noise blanker, a variety of scanning functions as well as a hand microphone and electronic keyer as standard.

The auto tuning steps function speeds up tuning through the bands but only activates when turning the dial quickly. The band stacking register ensures that you always return to the last used frequency when changing bands.

To reject interference, the IC-718 has an IF shift function which shifts the centre frequency of the IF passband electronically to reduce nearby interference. A microphone compressor ensures really punchy audio to get your signal through in difficult operating conditions. The compression level is easily adjustable from the front panel. This function really makes a difference when propagation conditions are poor.
RF gain control is combined with the squelch control. The RF gain adjusts minimum response receiver gain and improves reception on the noisier bands. An electronic keyer with a variable dot/dash ratio control is built in. The CW pitch is variable from 300-900 Hz and the keyer speed goes up to 60 wpm! Full break in capability is available with an adjustable break-in delay.

The IC-718 has a total of 101 memory channels, which stores operating frequency and mode. The IC-718 has a number of options available to enhance the model including UT-106 DSP unit to further improve receiver performance, CR-338 High Stability Crystal improve the frequency stability to within . 5ppm, UT-102 voice synthesiser, which gives the IC-718 a clear electronically generated voice etc.

- See more at: http://www.icomuk.co.uk/IC-718/Amateur_Radio_Ham_Base_Stations#sthash.gMl9kdgl.dpuf

HF All Band Transceiver

Aimed as an entry-level product, the IC-718 continues all the traditions of high quality engineering that you would expect from Icom. Conveniently sized and easy to operate, the IC-718 utilises all the latest RF and digital technology and is designed to be one of the most practical rigs ever! The IC-718 offers an excellent overall specification coupled with ease of use. The first thing that strikes you about the IC-718 is its similarity to the IC-R75 and more importantly that the speaker is mounted on the front panel of the transceiver. With the speaker facing the operator audio can now be more clearly heard during operation.

The IC-718 features a clean 100-Watts transmitter for SSB and CW and a built in electronic keyer for CW and 40 watts output on AM. As you would expect, an all mode, general coverage receiver is built in and covers 30kHz -29.999 MHz. A newly designed PLL circuit has been adopted to improve Signal / Noise ratio characteristics. This combined with a 4-element system mixer ensures truly superior performance.

The IC-718 is equipped with a minimum number of switches and controls for ease of use. For example, the 10-key pad on the front panel allows you to directly enter an operating frequency, or access a memory channel. All popular operating modes are offered; USB, LSB, CW, RTTY (FSK) and AM, in addition there is a level adjustable noise blanker, a variety of scanning functions as well as a hand microphone and electronic keyer as standard.

- See more at: http://www.icomuk.co.uk/IC-718/Amateur_Radio_Ham_Base_Stations#sthash.gMl9kdgl.dpuf
The IC-718 features a clean 100-Watts transmitter for SSB and CW and a built in electronic keyer for CW and 40 watts output on AM. As you would expect, an all mode, general coverage receiver is built in and covers 30kHz -29.999 MHz. A newly designed PLL circuit has been adopted to improve Signal / Noise ratio characteristics. This combined with a 4-element system mixer ensures truly superior performance. - See more at: http://www.icomuk.co.uk/IC-718/Amateur_Radio_Ham_Base_Stations#sthash.gMl9kdgl.dpuf
  • ntry level HF base station transceiver
  • Multi mode operation (USB, LSB, CW, RTTY(FSK), AM)
  • 101 memory channels with alphanumeric name capability
  • Front mounted speaker for clear audio
  • Newly designed PLL circuit improves Signal/Noise ratio characteristics
  • Dimensions : 240(W) x 95(H) x 239 (D) mm
  • Weight : 3.8kg
  • - See more at: http://www.icomuk.co.uk/IC-718/Amateur_Radio_Ham_Base_Stations#sthash.gMl9kdgl.dpuf

HF All Band Transceiver

Aimed as an entry-level product, the IC-718 continues all the traditions of high quality engineering that you would expect from Icom. Conveniently sized and easy to operate, the IC-718 utilises all the latest RF and digital technology and is designed to be one of the most practical rigs ever! The IC-718 offers an excellent overall specification coupled with ease of use. The first thing that strikes you about the IC-718 is its similarity to the IC-R75 and more importantly that the speaker is mounted on the front panel of the transceiver. With the speaker facing the operator audio can now be more clearly heard during operation.

The IC-718 features a clean 100-Watts transmitter for SSB and CW and a built in electronic keyer for CW and 40 watts output on AM. As you would expect, an all mode, general coverage receiver is built in and covers 30kHz -29.999 MHz. A newly designed PLL circuit has been adopted to improve Signal / Noise ratio characteristics. This combined with a 4-element system mixer ensures truly superior performance.

The IC-718 is equipped with a minimum number of switches and controls for ease of use. For example, the 10-key pad on the front panel allows you to directly enter an operating frequency, or access a memory channel. All popular operating modes are offered; USB, LSB, CW, RTTY (FSK) and AM, in addition there is a level adjustable noise blanker, a variety of scanning functions as well as a hand microphone and electronic keyer as standard.

The auto tuning steps function speeds up tuning through the bands but only activates when turning the dial quickly. The band stacking register ensures that you always return to the last used frequency when changing bands.

To reject interference, the IC-718 has an IF shift function which shifts the centre frequency of the IF passband electronically to reduce nearby interference. A microphone compressor ensures really punchy audio to get your signal through in difficult operating conditions. The compression level is easily adjustable from the front panel. This function really makes a difference when propagation conditions are poor.
RF gain control is combined with the squelch control. The RF gain adjusts minimum response receiver gain and improves reception on the noisier bands. An electronic keyer with a variable dot/dash ratio control is built in. The CW pitch is variable from 300-900 Hz and the keyer speed goes up to 60 wpm! Full break in capability is available with an adjustable break-in delay.

The IC-718 has a total of 101 memory channels, which stores operating frequency and mode. The IC-718 has a number of options available to enhance the model including UT-106 DSP unit to further improve receiver performance, CR-338 High Stability Crystal improve the frequency stability to within . 5ppm, UT-102 voice synthesiser, which gives the IC-718 a clear electronically generated voice etc.

- See more at: http://www.icomuk.co.uk/IC-718/Amateur_Radio_Ham_Base_Stations#sthash.gMl9kdgl.dpuf
HF/50/70MHz Transceiver
  • ualwatch capability (in selected bands)
  • 0.150 to 3304.999MHz wideband coverage in SSB,CW,AM,FM,WFM modes
  • Built-in 260 minute digital (audio) recorder
  • High speed scanning – 100ch/sec (VFO scan)
  • Total of 1250 memory channels
  • Standard Lithium-Ion battery that allows up to 11 hours of continuous receive capability (FM mode, single receive)
  • Operation and charging from an external power source
  • Built-in ferrite bar antenna for AM and earphone cord antenna for FM broadcasts
  • VSC,CTCSS and DTCSS tone squelch
  • Useful bandscope
  • Optional CT-17, CI-V controller for PC remote control
  • Dial speed up function…When rotating the tuning knob rapidly, the tuning speed automatically speeds up.
  • Scan pause setting (2-20 seconds and hold) and scan resume (0-5 seconds and hold) setting.
  • Auto power off (30-120 minutes and busy)….Busy setting turns off the IC-R20 when signal is received for 3 minutes.
  • Various key lock functions…All, No SQL, No VOL and Normal lock settings.
  • Rotary selector and up/down buttons are reversible.
  • - See more at: http://www.icomuk.co.uk/IC-R20/Handheld_Receiver-Scanner#sthash.wCIH5Pzk.dpuf
  • Dualwatch capability (in selected bands)
  • 0.150 to 3304.999MHz wideband coverage in SSB,CW,AM,FM,WFM modes
  • Built-in 260 minute digital (audio) recorder
  • High speed scanning – 100ch/sec (VFO scan)
  • Total of 1250 memory channels
  • Standard Lithium-Ion battery that allows up to 11 hours of continuous receive capability (FM mode, single receive)
  • Operation and charging from an external power source
  • Built-in ferrite bar antenna for AM and earphone cord antenna for FM broadcasts
  • VSC,CTCSS and DTCSS tone squelch
  • Useful bandscope
  • Optional CT-17, CI-V controller for PC remote control
  • Dial speed up function…When rotating the tuning knob rapidly, the tuning speed automatically speeds up.
  • Scan pause setting (2-20 seconds and hold) and scan resume (0-5 seconds and hold) setting.
  • Auto power off (30-120 minutes and busy)….Busy setting turns off the IC-R20 when signal is received for 3 minutes.
  • Various key lock functions…All, No SQL, No VOL and Normal lock settings.
  • Rotary selector and up/down buttons are reversible.
  • - See more at: http://www.icomuk.co.uk/IC-R20/Handheld_Receiver-Scanner#sthash.wCIH5Pzk.dpuf

HF/50/70MHz Transceiver

The IC-7300 is a revolutionary compact radio that will excite HF operators from beginners to experts. This new model has a high-performance real-time spectrum scope and employs a new RF direct sampling system. The IC-7300’s real-time spectrum scope provides top-level performance in resolution, sweep speed and dynamic range. While listening to received audio, the operator can check the real-time spectrum scope and quickly move to the intended signal. The combination of the real-time spectrum scope and waterfall function improves the quality and efficiency of HF operation.

The new RF direct sampling system employed by the IC-7300 realises class leading RMDR (Reciprocal Mixing Dynamic Range) and Phase Noise characteristics. In addition, the IC-7300 features the 70MHz band (European versions only), a large touch screen colour TFT LCD, convenient multi-function dial knob, automatic antenna tuner, voice recorder function and more.

 

 

Class Leading Real-Time Spectrum Scope
You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300’s real-time spectrum scope offers the simultaneous operations found in higher tier models. This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The IC-7300’s touch screen introduces a “Magnify” function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune.

High-Resolution Waterfall Function
The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of the IC-7300 and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope.

Audio Scope Function
The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either the transmit or receive audio can be displayed on the FFT scope with the waterfall function and the oscilloscope.

RF Direct Sampling System
The IC-7300 employs an RF direct sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading technology making an epoch in amateur radio.

New “IP+” Function
The new “IP+” function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion.

Class Leading RMDR (Reciprocal Mixing Dynamic Range) and Phase Noise Characteristics
The IC-7300’s RMDR is improved to about 97dB* (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals.
* At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz)

Large Touch Screen Colour TFT LCD
The large 4.3 inch colour TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents.

Multi-Dial Knob for Smooth Operation
The combination of the multi-dial knob and the touch screen offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item with a touch of the screen and adjust levels by turning the multi-dial knob.

SD Memory Card Slot for Saving Data
The IC-7300 can store various contents into SD card such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Personal and firmware updating data can also be stored to the SD card for easy setting.

15 Discrete Band-Pass Filters
The IC-7300 has 15 discrete RF band-pass filters. The RF signal is only passed through one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters.

Built-In Automatic Antenna Tuner
The antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function* allows a wide range of temporary antennas to be tuned.
* Do not use the Enforced Tuning function except in case of an emergency. Transmission power may be reduced.

Superior Sound Quality
To offer superior sound quality, a new speaker unit has been incorporated and is allocated dedicated space in the aluminium die-cast chassis.

- See more at: http://www.icomuk.co.uk/IC-7300/Amateur_Radio_Ham_Base_Stations#sthash.tFP5HWKV.dpuf
F/50/70MHz Transceiver
HF/50/70MHz Transceiver
HF/50/70MHz Transceiver
  • 0MHz band (European versions only)
  • Class Leading Real-Time Spectrum Scope
  • High-Resolution Waterfall Function
  • Audio Scope Function
  • RF Direct Sampling System
  • New “IP+” Function
  • Class Leading RMDR (Reciprocal Mixing Dynamic Range) and Phase Noise Characteristics
  • Large Touch Screen Colour TFT LCD
  • Multi-Dial Knob for Smooth Operation
  • SD Memory Card Slot for Saving Data
  • 15 Discrete Band-Pass Filters
  • Built-In Automatic Antenna Tuner
  • Superior Sound Quality
  • New HM-219 hand microphone supplied
  • Effective large cooling fan system
  • A Multi-function meter
  • 101 memory channels (99 regular, 2 scan edges)
  • Optional RS-BA1 IP remote control software (the spectrum scope with the waterfall can be observed)
  • CW functions: Full break-in, CW reverse, CW auto tuning
  • - See more at: http://www.icomuk.co.uk/IC-7300/Amateur_Radio_Ham_Base_Stations#sthash.tFP5HWKV.dpuf
HF/50/70MHz Transceiver

Aimed as an entry-level product, the IC-718 continues all the traditions of high quality engineering that you would expect from Icom. Conveniently sized and easy to operate, the IC-718 utilises all the latest RF and digital technology and is designed to be one of the most practical rigs ever! The IC-718 offers an excellent overall specification coupled with ease of use. The first thing that strikes you about the IC-718 is its similarity to the IC-R75 and more importantly that the speaker is mounted on the front panel of the transceiver. With the speaker facing the operator audio can now be more clearly heard during operation.

The IC-718 features a clean 100-Watts transmitter for SSB and CW and a built in electronic keyer for CW and 40 watts output on AM. As you would expect, an all mode, general coverage receiver is built in and covers 30kHz -29.999 MHz. A newly designed PLL circuit has been adopted to improve Signal / Noise ratio characteristics. This combined with a 4-element system mixer ensures truly superior performance.

The IC-718 is equipped with a minimum number of switches and controls for ease of use. For example, the 10-key pad on the front panel allows you to directly enter an operating frequency, or access a memory channel. All popular operating modes are offered; USB, LSB, CW, RTTY (FSK) and AM, in addition there is a level adjustable noise blanker, a variety of scanning functions as well as a hand microphone and electronic keyer as standard.

The auto tuning steps function speeds up tuning through the bands but only activates when turning the dial quickly. The band stacking register ensures that you always return to the last used frequency when changing bands.

To reject interference, the IC-718 has an IF shift function which shifts the centre frequency of the IF passband electronically to reduce nearby interference. A microphone compressor ensures really punchy audio to get your signal through in difficult operating conditions. The compression level is easily adjustable from the front panel. This function really makes a difference when propagation conditions are poor.
RF gain control is combined with the squelch control. The RF gain adjusts minimum response receiver gain and improves reception on the noisier bands. An electronic keyer with a variable dot/dash ratio control is built in. The CW pitch is variable from 300-900 Hz and the keyer speed goes up to 60 wpm! Full break in capability is available with an adjustable break-in delay.

The IC-718 has a total of 101 memory channels, which stores operating frequency and mode. The IC-718 has a number of options available to enhance the model including UT-106 DSP unit to further improve receiver performance, CR-338 High Stability Crystal improve the frequency stability to within . 5ppm, UT-102 voice synthesiser, which gives the IC-718 a clear electronically generated voice etc.

- See more at: http://www.icomuk.co.uk/IC-718/Amateur_Radio_Ham_Base_Stations#sthash.gMl9kdgl.dpuf

The new RF direct sampling system employed by the IC-7300 realises class leading RMDR (Reciprocal Mixing Dynamic Range) and Phase Noise characteristics. In addition, the IC-7300 features the 70MHz band (European versions only), a large touch screen colour TFT LCD, convenient multi-function dial knob, automatic antenna tuner, voice recorder function and more.

 

 

Class Leading Real-Time Spectrum Scope
You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300’s real-time spectrum scope offers the simultaneous operations found in higher tier models. This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The IC-7300’s touch screen introduces a “Magnify” function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune.

High-Resolution Waterfall Function
The combination of the waterfall function and the real-time spectrum scope assists in maximum receive performance of the IC-7300 and increases QSO opportunities without missing weak signals. The waterfall function shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope.

Audio Scope Function
The audio scope function can be used to observe various AF characteristics such as microphone compressor level, filter width, notch filter width and keying waveform in the CW mode. Either the transmit or receive audio can be displayed on the FFT scope with the waterfall function and the oscilloscope.

RF Direct Sampling System
The IC-7300 employs an RF direct sampling system. RF signals are directly converted to digital data and processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction. This system is a leading technology making an epoch in amateur radio.

New “IP+” Function
The new “IP+” function improves 3rd order intercept point (IP3) performance. When a weak signal is received adjacent to strong interference, the AD converter is optimized against signal distortion.

Class Leading RMDR (Reciprocal Mixing Dynamic Range) and Phase Noise Characteristics
The IC-7300’s RMDR is improved to about 97dB* (typical value) and Phase Noise characteristics are improved about 15dB (at 1 kHz frequency separation) compared to the IC-7200. The superior Phase Noise characteristics reduce noise components in both receive and transmit signals.
* At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz)

Large Touch Screen Colour TFT LCD
The large 4.3 inch colour TFT touch LCD offers intuitive operation. Using the software keypad of the touch screen, you can easily set various functions and edit memory contents.

Multi-Dial Knob for Smooth Operation
The combination of the multi-dial knob and the touch screen offers quick and smooth operation. When you push the multi-dial knob, menu items are shown on the right side of the display. You can select an item with a touch of the screen and adjust levels by turning the multi-dial knob.

SD Memory Card Slot for Saving Data
The IC-7300 can store various contents into SD card such as received and transmitted audio, voice memories, RTTY/CW memories, RTTY decode logs and captured screen images. Personal and firmware updating data can also be stored to the SD card for easy setting.

15 Discrete Band-Pass Filters
The IC-7300 has 15 discrete RF band-pass filters. The RF signal is only passed through one of the band-pass filters, while any out of range signals are rejected. High Q factor coils are used to minimize the loss in the RF band-pass filters.

Built-In Automatic Antenna Tuner
The antenna tuner memorizes its settings based on your transmit frequency, so that it can rapidly tune when you change operating bands. The Enforced Tuning function* allows a wide range of temporary antennas to be tuned.
* Do not use the Enforced Tuning function except in case of an emergency. Transmission power may be reduced.

Superior Sound Quality
To offer superior sound quality, a new speaker unit has been incorporated and is allocated dedicated space in the aluminium die-cast chassis.

- See more at: http://www.icomuk.co.uk/IC-7300/Amateur_Radio_Ham_Base_Stations#sthash.tFP5HWKV.dpuf

HF/50/70MHz Transceiver

The IC-7300 is a revolutionary compact radio that will excite HF operators from beginners to experts. This new model has a high-performance real-time spectrum scope and employs a new RF direct sampling system. The IC-7300’s real-time spectrum scope provides top-level performance in resolution, sweep speed and dynamic range. While listening to received audio, the operator can check the real-time spectrum scope and quickly move to the intended signal. The combination of the real-time spectrum scope and waterfall function improves the quality and efficiency of HF operation.

The new RF direct sampling system employed by the IC-7300 realises class leading RMDR (Reciprocal Mixing Dynamic Range) and Phase Noise characteristics. In addition, the IC-7300 features the 70MHz band (European versions only), a large touch screen colour TFT LCD, convenient multi-function dial knob, automatic antenna tuner, voice recorder function and more.

 

 

Class Leading Real-Time Spectrum Scope
You no longer have to choose whether to listen to the audio or have the spectrum scope sweep for signals as the IC-7300’s real-time spectrum scope offers the simultaneous operations found in higher tier models. This means you can use either the spectrum scope or the waterfall to quickly move to an intended signal while listening to the receiver audio. The IC-7300’s touch screen introduces a “Magnify” function. So, when you first touch the scope screen around the intended signal, the touched part is magnified. A second touch of the scope screen changes the operating frequency and allows you to accurately tune.

- See more at: http://www.icomuk.co.uk/IC-7300/Amateur_Radio_Ham_Base_Stations#sthash.tFP5HWKV.dpuf

 

 

DELIVERY €15.00 DPD COURIER FOR ANY ITEM

 

 

 


How to Order?

Ordering from us is easy - just call 074-9737152 Tuesday to Friday 9.30-5.00 pm. It only takes a few minutes to process your order, and we can help you choose the right products for your purposes. For next day delivery, please call before 1.00 pm.

How to Pay?

We accept credit cards and debit cards over the phone. We accept PayPal and Bank Transfers by email.